2
Installation
Before installing this unit, please read through the following points:
•
Do not place any cables where they can be pinched or stepped on.
•
Leave at least 50mm of space between the Recorder and other objects to allow air circulation.
•
Do not expose the Recorder or Cameras to excessive heat, cold, or moisture.
•
Never immerse any component in water, and do not spray cleaners of solvents on the unit. Unplug
units before cleaning. When cleaning, use a damp, lint-free cloth only.
•
Do not place heavy objects on cords, or cover cords with rugs or carpet.
•
Service should be handled only by qualified technicians.
Connection Guide
1. Mount the Cameras as required and connect them to them to the recorder using the required
cables.
2. Connect the
12V Power Supply
to the Recorder.
3. Plug all power adaptors into a Power-point.
4. Switch Recorder on from back of device. If necessary hold Power button for 3 seconds.
5. The power LED at the front of the Recorder should now be illuminated and the unit will make a
loud beep sound to indicate it is powered.
6. Connect the included mouse to the USB port on the front or back.
7. Connecting your local network or modem to the LAN port of the Recorder (we recommend doing
this last step after all the cameras have been configured).
