5.2 Installing the Door Detector
Prerequisites
Before installation, add the door detector to the hub and check the signal strength of the
installation location. We recommend installing the door detector in a place with a signal strength of
at least 2 bars.
Background Information
We recommend using expansion screws when installing the door detector. Make sure to align of
the magnet with that of the door detector during installation, otherwise normal use of the door
detector might be affected.
Procedure
Step 1
Loosen the screw to open the door detector.
Figure 5-4 Open the door detector
Step 2
Take out the magnet.
Figure 5-5 Take out the magnet
Step 3
Drill 4 holes into the door according to the hole positions of the door detector, and then
put the expansion bolts into the holes.
User’s Manual
9