Parameter
Value
Exit Delay Time
Door Status
Open or close status of the door.
●
: Open.
●
: Closed.
24 H Protection Zone Status
Active status of the 24 h protection zone.
●
: Open.
●
: Closed.
Relay Status
The status of whether the door detector forwards accessory
messages to the hub through the repeater.
The function is only available when the version of the DMSS app is
1.96 or later, the hub is V1.001.0000000.6.R.211215 or later, and the
door detector is V1.000.0000001.0.R.20211203 or later.
Program Version
The program version of the door detector.
6.2 Configuring the Door Detector
On the hub screen, select a door detector from the peripheral list, and then tap to configure the
parameters of the door detector.
Table 6-2 Parameter description
Parameter
Description
Device Configuration
●
View door detector name, type, SN and device model.
●
Edit door detector name, and then tap Save to save
configuration.
Area
Select the area to which the button is assigned.
Temporary Deactivate
●
Tap Enable, and then the function of the door detector will be
enabled. Enable is set by default.
●
Tap Only Disable Tamper Alarm, and then the system will only
ignore tamper alarm messages.
●
Tap Disable, and then the function of the door detector will be
disabled.
LED Indicator
LED Indicator is enabled by default. For details on indicator
behavior, see user's manual of the corresponding devices..
●
If LED Indicator is disabled, the LED indicator will remain off
regardless of whether the door detector is functioning normally
or not.
●
The function is only available when the version of the DMSS app
is 1.96 or later, the hub is V1.001.0000000.4.R.211014 or later,
and the door detector is V1.000.0000001.0.R.20210818 or later.
User’s Manual
12
