Watchguard ALL-PACK1, User Manual

Page: 10 / 23

Alarm System Dashboard
Once the alarm system has been connected to your app,
the dashboard will be displayed.
Basic Information
Security Mode
Two-way Calling
Emergency SOS Alarm
Alarm Settings
System Status
Activitiy like event log etc.
Manage Accessories
Emergency Call
Press the SOS button in the event of an emergency. This will trigger an
immediate alarm even if the system is disarmed or in Home Mode.
To stop the alarm, press the disarm button on the app or remote control.
Press stay button, then press or button within 3 seconds arm arm disarm
to enter into arming or disarming state in mute mode without disturbing
someone.
Mute Mode
Stay Arm (Home Mode)
Sensors that are designated in the Home Zone are deactivated, allowing
you to move freely in your home. the sensors in Normal Zone will remain
active and if triggered, will immediately sound the alarm.
The Alarm System has three security modes and an
emergency SOS button.
Listen into the roon via the control panel and also speak with people
in the room.
Two-way Talk
Disarm the system when entering your home. All sensors will be
deactivated allowing you to move freely .
Disarm
Arm the system when leaving your home. All sensors will be activated.
Any sensors that are triggered will immediately sound the alarm.
Arm
（
Note: Mute Mode only works for operation via Remote Control.)