background image

WITHIN THE U.S.A. AND CANADA

OUTSIDE THE U.S.A. AND CANADA

WASTE KING COMMERCIAL

FOOD WASTE DISPOSERS

Models 500, 750, 1000, 1250, 1500, 2000, 3000, 5000, 10000

ONE YEAR WARRANTY

This appliance is warranted to be free of manufacturing defects in 
workmanship and material for one full year beginning from the date of original
purchase. Any part found to be defective will be replaced free of charge.
Service labor is included. Parts wear is not considered a defect.

This warranty is for products purchased and retained in the 50 states of the
United States of America and Canada. This warranty is VOID if the appliance
is moved after the original installation. Should the appliance be sold by the
original purchaser during the warranty period, the new owner continues to be
protected with the appliance in the same location only, until the expiration
date of the original purchaser’s warranty period.

This warranty shall not apply if service is provided by anyone other than a
Factory Authorized Service Agency. Nor will the warranty apply to damage
resulting from accident, abuse, failure to follow operating instructions, 
alteration, or if the installation does not comply with our installation instructions
or local building codes.

HOW TO  OBTAIN  SERVICE

For service, contact the factory at 800-454-4423 for a referral to the nearest
factory authorized service agency.

We want you to remain a satisfied customer. If a problem does come up that
cannot be resolved to your satisfaction, please let us know. Write: National
Service Manager, at the address shown below or phone. Please be sure to
include the model number, serial number and date of original purchase.

WASTE KING COMMERCIAL

WARRANTY DEPARTMENT

4240 E. LA PALMA AVENUE

ANAHEIM, CALIFORNIA 92807

800-454-4423

www.wasteking.com

WASTE KING COMMERCIAL

FOOD WASTE DISPOSERS

Models 500, 750, 1000, 1250, 1500, 2000, 3000, 5000, 10000

ONE YEAR WARRANTY

This appliance is warranted to be free of manufacturing defects in 
workmanship and material for one full year beginning from the date of original
purchase. Any part found to be defective will be replaced free of charge.
Labor is not included. Parts wear is not considered a defect.

This warranty shall not apply to damage resulting from accident, abuse, 
failure to follow operating instructions, alteration, or if the installation does not
comply with our installation instructions or local building codes.

This warranty is for products purchased and retained outside of the United
States of America, the District of Columbia and Canada.

HOW TO  OBTAIN  SERVICE

For warranty consideration, contact the dealer from whom you purchased the
appliance or write to us at the address shown below.

We want you to remain a satisfied customer. If a problem does come up that
cannot be resolved to your satisfaction, please let us know. Write: National
Service Manager, at the address shown below or phone. Please be sure to
include the model number, serial number and date of original purchase.

WASTE KING COMMERCIAL

WARRANTY DEPARTMENT

4240 E. LA PALMA AVENUE

ANAHEIM, CALIFORNIA 92807

U.S.A.

PHONE 01-01-714-524-7770

FAX 01-01-714-996-7073

www.wasteking.com

560P303P01

REV 12/97

Summary of Contents for 2000











Reviews: