6.2
Installation
Open the box, remove the packing materials, and carefully lift out the device and
accessories. Check the included accessories.
The device has to stand horizontally on a steady and even surface.
Install the device in a place where it will not block the working area and the
functionality (take the dimensions into account).
Do not install the unit outdoors or in places without proper ventilation.
Before start-up, be sure the device reaches room temperature.
We strongly recommend to
install the unit firmly to the discharge system
,
since it is equipped with an automatic water overflow discharge system, i.e. too
much filled
very hot water
runs out automatically, even when the discharge
cock is closed. Furthermore complete emptying for cleaning purposes etc. is
thus simplified.
Avoid overfilling and check the overflow system / drainage system. Strong
overfilling
can damage the electronics
in the medium term.
For damage caused by improper handling, no liability is assumed.
6.3
Storage
The unit location is very important when it comes to workplace safety, even if it is only to
be set up there for a short period. The room should be dry, well ventilated and vibration-
free. An even temperature and wooden supports also help. The unit should not be stored
or set up outdoors. If the unit is to be stored for an extended period, protect it from
moisture and dust.
7
Summary of Contents for Wapo-Ex 8 plus
Page 1: ...Boil Out and Polymerisation Unit Wapo Ex 8 plus MANUAL ...
Page 28: ......
