Choose between °C Celsius and °F Fahrenheit
Calibrate the temperature with a relative offset
+0.0 %
The relative offset of the heating curve causes a correction of the temperature value in
percent to the measured value. As shown in the symbol, the angle of the heating curve is
adjusted when you change this value. The relative offset value can be set in the range of -
9.9% to + 9.9%.
Calibrate the temperature with an absolute offset
+0.0 °C
To correct the heater curve by a value in °C or °F, you can use the absolute offset of the
heater curve. As shown in the symbol, the zero crossing of the heating characteristic shifts
when this value is changed. The absolute offset value can be set in the range of -9.9°C to
+ 9.9°C.
16
12
12b
Change the value and the algebraic
sign by tapping on the
respective numeral.
12a
Change the value and the algebraic
sign by tapping on the
respective numeral.
Summary of Contents for Wapo-Ex 8 plus
Page 1: ...Boil Out and Polymerisation Unit Wapo Ex 8 plus MANUAL ...
Page 28: ......
