Pictogram for the Sequence in Time and Date Function
Choice of Working Mode
Defines whether the time should start immediately or once the heating value has been
reached.
(a) (Default) Unit heats up to the temperature programmed via taking into account
any heat losses caused by the conveying pump. After reaching this value, the result
measured is validated by a control cycle. If the value is confirmed, the polymerzation will
start.
(b) The programmed polymerization starts immediately, but the earliest at
65 °C
Celsius.
Please select a suitable preheating temperature (see page 13.)
17
14
13
a
b
5
7
Summary of Contents for Wapo-Ex 8 plus
Page 1: ...Boil Out and Polymerisation Unit Wapo Ex 8 plus MANUAL ...
Page 28: ......
