Wassermann Cemat-NT 4, User Manual

Page: 6 / 20

5 Application
The Cemat-NT family of fine-abrading units have multiple chambers for abrading,
roughening and polishing, and are used to bring a lasting finish to the workpiece.
The latest technology means that system blockages are virtually a thing of the past. The
instruments operate accurately and can prevent clumping of the abrasive. The new
techniques used break up the abrasive continuously. The entire system is under pressure
constantly and is ready for operation immediately. All Cemat-NT units are pneumatically
controlled, thereby avoiding problems with electronics.
Only use the device for this type of application.
6 Before Starting
6.1 Transport
Before transporting the unit, ensure that it has been unplugged from the power socket.
Make sure that it is packed correctly in order to avoid accidental damage.
Be sure to check for any transport damage when unpacking the goods. Note down
any damage if found.
6.2 Storage
The unit location is very important when it comes to workplace safety, even if it is only to
be set up there for a short period. The room should be dry, well ventilated and vibration-
free. An even temperature and wooden supports also help. The unit should not be stored
or set up outdoors. If the unit is to be stored for an extended period, protect it from
moisture and dust.
6