background image

 13  EU Declaration of Conformity

in accordance with 2014/35/EU (Low Voltage Directive) and 2014/30/EU (Electromagnetic 
Compatibility Directive) and 2006/42/EC (Machinery Directive) and 2011/65/EU (RoHS 
Directive) 

Manufacturer:

W A S S E R M A N N
Dental-Maschinen GmbH
Rudorffweg 15-17
21031 Hamburg 
Germany

Product description:

Fine Blasting Unit 
for dental 
applications

Model:

CEMAT-NT 4
CEMAT-NT 3
CEMAT-NT 3 115 V version
CEMAT-NT 2

Item No. 190992
Item No. 190990
Item No. 190989
Item No. 190993

Applicable 
standards:

DIN EN 61010-1
DIN EN 61000-6-3
DIN EN 61000-6-1
DIN 45635-1
DIN EN 60335-1

Hiermit wird bestätigt, dass die oben bezeichnete Maschine den genannten EU-Richtlinien
entspricht. Diese Erklärung wird ungültig, falls die Maschine ohne unsere Zustimmung 
verändert wird.
This is to confirm that the above mentioned machine complies with the described EU 
guidelines. This declaration becomes invalid if the machine is modified without our 
approval.
Cette machine est conforme aux normes en vigueur d´Union européenne. Cet avis est 
nul et non avenant si cette machine est modifiée sans notre accord.
Esta máquina, anteriormente mencionada, cumple con los limites requeridos por el 
reglamento UE. Ahora bien, esta declaración quedará invalidada en caso de realizar 
modificaciones al aparato sin nuestra aprobación.
Hiermee wordt bevestigd dat bovengenoemde machine voldoet aan de voorgeschreven 
EU normen. Deze verklaring verliest geldigheid als er zonder onze uitdrukkelijke 
toestemming wijzigen aan de machine worden aangebracht.

Place, date: Hamburg, 2017-07-14

Company stamp:

Signature : ________________________
                            Wilfried Wassermann
                               (Managing Director)

17

Summary of Contents for Cemat-NT 4





















Reviews: