Wassermann Cemat-NT 4 User Manual Download Page 2

Page: 2 / 20

Dear customer,

Thank you for choosing a product from the Wassermann range. Wassermann Dental-

Maschinen incorporates the highest standards of quality and the latest technology.

In order to enjoy maximum performance and years of trouble-free operation, please read

this user manual carefully before you connect this device and start work, and operate the

device according to the recommended guidelines. The operation safety and the

functionality of this device can only be guaranteed if you follow both the general safety

guidelines and the applying laws to prevent accidents as well as the precautions given in

this user manual. We are not liable for any damages which occur due to inappropriate

usage or faulty operation of this device.

Make sure that anyone using this device has read and understood this user

manual.

Keep this user manual in a safe place where it can be referred to as required at

any time.

The unit complies with the relevant EU guidelines.

The unit is subject to the EU guidelines 2012/19/EU (WEEE Directive).

Company address:

Wassermann Dental-Maschinen GmbH

Rudorffweg 15-17

21031 Hamburg, Germany

Phone : +49 (0)40 730 926 -20/ -24 Fax.: +49 (0)40 730 37 24

[email protected]

www.wassermann.hamburg

Erstellt: 14.07.17/ msc Version: 2 Auftrag: 190992/038//190990/190989/066//190993/018

Summary of Contents for Cemat-NT 4





















Search results

Summary of Contents for Cemat-NT 4

Reviews:

Related manuals for Cemat-NT 4

Brands by name

Popular brands

Wassermann Cemat-NT 4, User Manual

Search results

Summary of Contents for Cemat-NT 4

Reviews:

Related manuals for Cemat-NT 4

Brands by name

Popular brands