Wasp WWS650 Product Reference Manual Download Page 19

Page: 19 / 316

Product Reference Guide

Chapter 2

Setup

Unpacking

Check carefully to ensure the reader and any accessories ordered are present and undamaged.

If any damage occurred during shipment, contact Wasp.
KEEP THE PACKAGING. Should the unit ever require service, it should be returned in its original

shipping container.

Setting Up the Reader

Follow the steps provided in this section to connect and get your reader up and communicating

with its host.

1. Begin by

Connecting the Base Station.

2. Go to

Interface Selection

and set the desired interface.

Configure Interface Settings

(only if not using factory settings for that interface).

4. Go to

Configuring Other Features

(if modifications are needed from factory settings).

Summary of Contents for WWS650





























































































































































































































































































































Search results

Summary of Contents for WWS650

Reviews:

Related manuals for WWS650

Brands by name

Popular brands

Wasp WWS650, Product Reference Manual

Search results

Summary of Contents for WWS650

Reviews:

Related manuals for WWS650

Brands by name

Popular brands