Wasp WWS650, Product Reference Manual

Page: 184 / 316

Enter/Exit Programming Mode Plessey
174 Wasp WWS650
Plessey Set Length 1
This feature specifies one of the bar code lengths for Plessey Length Control on page 173 .
Length 1 is the minimum label length if in Variable Length on page 245 Mode, or the first fixed
length if in Fixed Length on page 245 Mode. Length includes the bar code’s data characters
only. The length can be set from 01 to 50 characters.
Table 23 provides some examples for setting Length 1. See page 245 for detailed instructions
on setting this feature.
Table 23. Plessey Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT Plessey LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CPLL1
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character