52
WPL 612 User Manual
Gap Mode
1/4
>
Automatic
Manual
Pre-Printed
A. Gap Mode
Calibration
1/4
>
Gap Mode
Bline Mode
Cont. Mode
Press the
and
buttons to scroll the cursor to the media type and press
the
button to enter the sensor calibration mode.
Note: If printing from enclosed software/driver, the software/driver will send
out the GAP or BLINE command, which will overwrite the sensor type
setting set from the front panel.
A-1 Automatic
When enter the [Automatic] option, you will see following message, and
printer will feed 2 to 3 gap labels to calibrate the sensor sensitivity
automatically. When calibration is completed, the LCD screen will return to
the previous menu.
Gap Mode
Automatic
A-2 Manual
In case “Automatic” sensor calibration cannot apply to the media, please
use “Manual” function to calibrate the gap sensor manually.
Gap Mode
2/4
Automatic
>
Manual
Pre-Printed
When enter [Manual] option, you will see following message. Please
complete there steps
：
Paper Len.
00812 dot
1. Press the button to move
the cursor from left digit to right digit,
and press the
button to set
mm/ inch”. Press the
button to set the paper length into the
printer.
