38
WPL 612 User Manual
Dankness
16
Print Speed
6
Tear Off
+000
3.1.1-2.1 Darkness:
Print Setup
1/17
>
Darkness
Print Speed
Tear off
Use this option to setup printing darkness. The available setting is from 0 to 30, and
the step is 1. Printer default density is 16.You may need to adjust your density
based on selected media.
Press
and
to increase/decrease the printing darkness. Press
key to enable the setting. Press
key to cancel the setting and
return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
3.1.1-2.2 Print Speed:
Print Setup
2/17
Darkness
>
Print Speed
Tear Off
Use this option to setup print speed. The each increament/decreament is 1 ips.
Press
key to raise the print speed, and press
key to decrease
print speed. Press
key to set it into printer. Press
key to
cancel the setting and return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send
out the command, which will overwrite the setting set from the front
panel.
3.1.1-2.3 Tear Off:
Print Setup
3/17
Darkness
Print Speed
>
Tear Off
This option is used to fine tune media stop location. Press the
button to
