24
WPL 612 User Manual
2.6.4 Remove Liner from Internal Rewind (Option)
1. Break the liner between peel-off roller and the internal rewind spindle.
2. Push the liner release button to release the liner on the internal rewind spindle.
3. Then, slide off the liner from internal rewind spindle.
2.6.5 Loading Media in Rewind Liner with Label Mode (Option)
This mode can rewind the media including liner and label on the rewind spindle.
1. Open the printer right side cover.
2. Insert the supply holder guide and paper core into the internal rewind for 1” core label
roll.
Insert the supply holder guide, 3” label core adapter and paper core into the internal
rewind for 3” core label roll.
3. Insert media into the printer label spindle. Pull label roll leading edge forward through
the media guide bar, damper media sensor and place the label leading edge onto the
platen roller. (Please refer to section 2.6.1)
4. Then, pull approximately 650mm of label through the label redirect front panel.
5. Wrap the label onto the internal rewind spindle and stick the label onto the paper core.
6. Insert another supply holder guide into the internal rewind for 1” core label roll.
7. Using the LCD panel to set the media sensor type and calibrate the selected sensor.
(Please refer to section 3.1.2)
2.6.6 Remove Labels from Internal Rewind (Option)
1. Slide off the labels with supply holder guides from internal rewind spindle.
