27
WPL 612 User Manual
2.8 Using the Keyboard with PS/2 Interface
1. Turn off the power of printer.
2. Plug the keyboard with PS/2 interface cable into PS/2 connector on the rear of the
printer.
3. Turn on the printer.
4. After pressing the
F1
key of the keyboard, the LCD of printer will display as
following.
File List
2/4
DRAM
>
FLASH
CARD
5. Use up
↑
or down
↓
key of the keyboard to move “>” cursor and to select either
DRAM, FLASH or CARD that you previously saved file in and press
Enter
key of
the keyboard to list files.
6. Select the file and press
Enter
key to execute the .BAS file.
FLASH File List
TEST1.BAS
>
TEST2.BAS
TEST3.BAS
7. Then, you can type the words or the number of the copy from keyboard by
your .BAS file program.
Press
F1
key of the keyboard to start this function.
Press up
↑
or down
↓
key of the keyboard to move cursor of printer LCD display to select
the option.
Press
Esc
key of the keyboard to return the previous menu.
Press
Enter
key of the keyboard to enter/execute cursor located option.
Press
Ctrl + C
keys of the keyboard to restart the printer and back to “Ready” state.
