washloo Side Control, User Manual

Page: 9 / 21

Installation Guide
Installation of Washloo Seat
Installation of Water Pipe Fixtures
1. Push the Plastic Water Pipe into the
compression fitting on the Washloo.
Installing the Washloo Seat
1. Place the Washloo in front of the Fixing
Bracket. Using the release button on the
lower righthand side allow the locating
chamfer on the unit to slide backwards
onto the fixing bracket.
2. Push the Washloo back onto the Fixing
Bracket in a sliding motion.
3. Ensure the Fixing Bracket does not move
and misalign the Washloo.
Fixing
Bracket
Release
button
Cistern
Installing the Water Feed Accessories
1. Push the Plastic Water Pipe into the
compression/push fitting on the T Valve/Filter
2. Push the Plastic Water Pipe into
the compression/push fitting on
the Washloo.
T Valve/Filter
T Valve
Connector
Plastic Water
Pipe
Push
Fit
7