washloo Side Control, User Manual

Page: 8 / 21

Installation Guide
Installation of Fixing Bracket
1. Loosen nuts and attachment
bolts holding original toilet
seat on.
2. Remove original toilet seat
and all fasteners
Toilet
Seat
Bolts
Washers
Nuts
Mounting Bolts
Steel Adjustment
Brackets
Fixing Bracket
Rubber Expansion
Sleeves
1. Place Rubber Expansion Sleeves
into the attachment holes on your
existing toilet.
2. Place the Fixing Bracket on over
the installation holes.
3. Place the Steel Adjustment
Brackets into the Fixing Bracket as
shown.
4. Install the Mounting bolts and
tighten down to ensure the ‘Fixing
Bracket’ is in the correct position.
*The Fixing Bracket can be adjusted
between 130-170mm to allow adjustment
of the Washloo.
Removal of Current Toilet Seat
6