washloo Side Control, User Manual

Page: 15 / 21

Maintenance
Cleaning and Maintenance; Nozzle Cleaning.
1. Press the nozzle cleaning button and the
Washloo will spray the water over the nozzle.
2. Press the nozzle cleaning button a second time
and the rear nozzle will extend out, pressing
again will extend the ‘feminine nozzle’.
3. Clean the nozzles with a brush.
4. To replace the nozzles (spare nozzles included)
hold the tip of the nozzle and twist anti
clockwise.
5. Replacing the tip – insert the replacement
nozzle and twist clockwise.
Cleaning and Maintenance; Filter Removal
NOTE – If the water pressure reduces please remove and clean the filter as
shown below.
1. Close the shut off valve and stop the water
supply.
2. Disassemble the filter – remove the filter using
the ‘spanner’ provided.
3. Remove filter out of ‘T - Piece’ as shown in the
illustration.
4. Clean any debris from the filter using a small
brush and rinse thoroughly.
5. To reinstall please follow the reverse of the
above instructions.
Not using the toilet for a long period
Turn off valve/T- Piece and power supply.
13