23.13.4 Maintenance of the Phoenix connectors
Loosen the four Torx screws in the cover of CCU by using a 4 mm Torx
key and open the cover.
Phoenix connectors
1 Use a suitable sized flat tip screw driver
and tighten all the
screws of every Phoenix connector in CCU.
2 Once all of the screws have been tightened,
press down all
the Phonix connectors by finger tips. This is because some of them
may have risen slightly because of engine vibrations.
3 Close the cover
and tighten the screws.
4 Check all other
CCU-, DCU-, KDU-, and SMU boxes in the
same way.
Phoenix
connector
Fig 23-25
3223189723
WECS 3000
34SG-200408-01