Page 11
For technical questions, please call 1-888-866-5797.
Item 57342
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
install Blade Guard
WarninG! always use saw blade guard and riving knife for every through-cutting operation.
For through-cutting operations where the saw blade cuts completely through the thickness of
the workpiece, the guard and other safety devices help reduce the risk of serious injury.
1. Raise Blade Guard Lock, then place Blade Guard
on top of Riving Knife so the Roller slides into
open slot at top of Riving Knife. Push Guard to the
back of the slot, then lower Blade Guard Lock.
2. Make sure Blade Guard is fully engaged, aligned
properly and does not contact the Blade.
3. Adjust Blade Guard to prevent
contact with Saw Blade.
WarninG! tO prEVEnt SEriOuS inJury:
The Blade Guard must be removed for making
non-through cuts and must be reinstalled
after making non-through cuts.
Blade
Guard
Lock
riving
Knife
install rip Fence
WarninG!
tO prEVEnt SEriOuS inJury:
to prevent kickback, make sure rip Fence is parallel to the blade and locked in place.
Do not use rip Fence when cutting across wood grain (crosscutting).
note:
The Rip Fence can be installed
on either side of Blade.
1. Raise Rip Fence Lock.
2. Place Rip Fence on Work Table, then side to
desired location using Scale if necessary.
3. Lower Rip Fence Lock.
rip
Fence
Lock
Dust Extraction Setup
Attach dust collection system to Dust Port on back of Table Saw.
