INARC-1000 I/ 1250 I
·15·
2.3 TIG mode
(1) Ensure firmly connection to ground cable and TIG torch.
(2) Ensure firmly connection to gas hose and gas cylinder if it is gas cooled;
Ensure firmly connection to water hose and water cooling machine if it is water cooled.
(3) Adjust every switches and potentiometers on the front panel to proper position in
line with selected mode.
(4) Turn on the circuit breaker on the power source.
(5) Connect input 3 phase power cable to switch box.
Attention
:
Cut off the power supply before connecting the welding cable.
Ensure the good connection between welding cable and connection terminal.