INARC-1000 I/ 1250 I
·１７·
(6) MMA / TIG / Air arc gouging switch
Transfer among MMA / TIG / Air arc gouging
(7) 4-step / 2-step switch
Used in TIG mode. It is auto-lock when in 4-step, and non-auto-lock when in 2-step
(8) Arc length switch
z
In MMA mode:
Long: Output cable length is more than 25m, less than 40m.
Short: Output cable length is less than 10m.
Middle: Output cable length is more than 10m, less than 25m.
z
It is on “Long” position when in air arc gouging welding.
(9) Arc-force current adjustment knob
Adjust arc-force current
(10) Welding current adjustment knob
Adjust welding current
(11) Output terminal (+)
z
In MMA welding, it is connected to welding cable
z
In air arc gouging, it is connected to the torch
z
In TIG welding, it is connected to the workpiece
(12) Output terminal (+)
z
In MMA welding or in air arc gouging, it is connected to the workpiece
z
In TIG welding, it is connected to the torch
(13) Gas outlet (S series machine does not have this one)
Connect the gas hose of the torch
(14) Socket P20
Control switch of the torch
