background image

Installation Instructions

P-1337-1
819-0317

Electrically Released Brake Module

For EM-FBB and EUM-FBB

An Altra Industrial Motion Company

®

DIST. AUTORIZADO

MEX (55) 53 63 23 31
QRO (442) 1 95 72 60

MTY (81) 83 54 10 18
[email protected]

Summary of Contents for EM-FBB Series

Page 1: ...ructions P 1337 1 819 0317 Electrically Released Brake Module For EM FBB and EUM FBB An Altra Industrial Motion Company DIST AUTORIZADO MEX 55 53 63 23 31 QRO 442 1 95 72 60 MTY 81 83 54 10 18 ventas industrialmagza com ...

Page 2: ...ace with the four 4 long hex head capscrews Suggested torque for capscrews is 30 35 lb ft Step 2 Electrical Connections and Control Requirements A The wiring diagram included with each Warner Electric control shows the proper electrical connections to be made B Controls used must have adjustable output voltage C All Permanent Magnet Type Electrically Released Brake Modules are polarity sensitive T...

Page 3: ...ed to perform the procedure No power is applied to motor during this procedure Power normally supplied by motor to brake control should be supplied by alternate method 1 With power off connect the positive lead of the power supply to the positive red lead of the brake and the negative lead of the power supply to the negative black lead of the brake 2 Connect a volt meter to measure the voltage app...

Page 4: ...under this warranty is limited to the repair or replacement of the defective product and in no event shall Warner Electric LLC be liable for consequential indirect or incidental damages of any kind incurred by reason of the manufacture sale or use of any defective product Warner Electric LLC neither assumes nor authorizes any other person to give any other warranty or to assume any other obligatio...

Reviews: