©2016 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
10 98178B0
28. While holding light bracket (A4) in place (from under and
behind bumper), line up light bezel (A8) through front
bumper light port to bracket. Secure pieces together
with ten stainless steel socket head screws (B10). Review
exploded view on page 3.
29. Repeat for other side.
NOTE: Light bezels are equipped with removable panels for
lights. Lights shown installed are sold separately.
30. Reinstall license plate.
31. If not installing optional Ascent bar accessories, plug unused
holes with provided hole plugs (B11). Refer to exploded
view on page 3.
32. Your installation is now complete.
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
A10
Figure 23
