©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
95578A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove the four M10 bolts securing brush guard to vehicle.
Remove brush guard completely and set aside.
2. Attach the winch mount to the front plow mount, using four
M8 flanged bolts (item 5) and M8 locking flange nuts (item
6) provided in the kit.
3. Using the two 20mm hex head cap screws and lock
washers (provided in the winch kit)
attach the winch/plow
mount assembly to the winch’s rear mounting holes.
Do not fully tighten at this time.
Figure 1
Figure 2
Figure 3
