©2021 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
108765A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove the two torx head screws from the front plastic
shroud.
2. Remove the six torx head screws that hold the lower
bumper tubes to the front of the vehicle.
3. From under each front fender, remove the upper
bumper tube mounting bolt.
4. Remove bumper and set aside.
5. From inside the vertical frame upright, just above the
front swing arm, remove the M8 bolt (each side).
Figure 1
Figure 2
Figure 3
Remove
Remove
Remove
Remove
Remove
