©2021 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
108765A0
I N S T A L L A T I O N I N S T R U C T I O N S
10. Install tabs to winch mount (A1) using the short M8
bolts (B1) and flat washers (B2) making sure tabs are
aligned and then tighten.
11. Install fairlead to the front of the winch mount, using
fairlead hardware found in your winch kit.
NOTE: If
you plan on installing a plow mount, we recommend
installing the plow roller now, following instructions
in your plow mount.
12. Position winch on winch mount.
NOTE: This is a
feet up installation, please take note of the motor
orientation.
13. Thread the winch rope through the fairlead opening.
14. Secure winch to mount using the four M8 X 25mm long
bolts and four lock washers supplied in your winch kit.
NOTE: This is a feet up installation so please note the
orientation of the motor to the mount.
Figure 9
Motor
Winch Rope
Clutch Handle
Figure 8
Figure 7
