background image

©2021 Warn Industries, Inc. WARN® and the WARN logo are trademarks of  Warn Industries Inc.

 8 

108765A0

I N S T A L L A T I O N   I N S T R U C T I O N S

19.  Install one M8 X 25mm bolt (B3) through the lower hole  

of the vertical frame upright and into the threaded 

weldnut of the mount.  

Do not tighten completely to 

allow for adjustment.

20.  Repeat for other side.  Refer to exploded view on page 3.

21.  Level mount and install the last upper torx head screw 

and the two outer corner torx head screws.  

TIP:  Use 

a round punch or Phillips screwdriver to help align 

the holes by placing the tool in an adjacent hole and 

moving the tool side to side.  Be careful not to damage 

the threads of the hole you are using.

22.  Reinstall the bumper using factory hardware removed 

in step 3.

23.  Install remaining torx head screws.   

TIP:  Use a round 

punch or Phillips screwdriver to help align the holes by 

placing the tool in an adjacent hole and moving the tool 

side to side.  Be careful not to damage the threads of the 

hole you are using.

24.  Beginning at the front of the vehicle, torx screws, 

bumper hardware, and finally all hardware securing 

winch mount to frame.   Refer to torque specifications 

on page 3. 

 

NOTE: For synthetic winch rope applications, slide the 

abrasion sleeve on before installing hook.

25.  Install hook/hook strap combo to rope using clevis and 

cotter pin. 

26.  Connect winch wiring following instructions supplied 

with your winch.

B3

Torx screws

Torx screws

Figure 13

Figure 15

Figure 14

Summary of Contents for 108760










Reviews: