©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
8
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
13. Install fairlead to fairlead plate (A5) using hardware from
the winch kit.
14. Connect winch wiring cables to winch per winch
installation instructions.
15. Place fairlead plate/fairlead on top of the bumper, lining
up winch mounting holes.
16. Place the winch on top of the fairlead plate, aligning
mounting feet with holes.
17. Using the access holes and a 13mm socket with
extension, secure winch using four non flange M8 hex
head bolts (B2) and lock washers (B1).
TIP: Lift one corner
of the winch slightly as you begin to install your first bolt.
Once all the winch bolts are installed, torque the winch
bolts to proper torque specifications on page 3.
18. Secure bumper using two M8 flange head bolts (B4) and
lock nuts (B3).
19. Plug access holes with supplied plugs (B9).
Figure 15
Figure 16
Figure 14
B2 & B1
B4 & B3
