©2019 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
106859A0
I N S T A L L A T I O N I N S T R U C T I O N S
3. Remove the four push pull pin fasteners and remove the
front center plastic. Save hardware for later step.
4. Install support mounting bracket (A2).
TIP: For this step, it may be more clear to refer to the
exploded view on page 3 for part A2.
a. Position the bracket (A2) behind the sheet metal flange
just behind the plastic grill.
b. Install two flange head 10mm bolts (B6) through the
bracket and sheet metal flange.
c.
NOTE: The mounting holes vary in size. The size of the
mounting hole determines the size of the bolt for this
step.
Install the two flange head bolt (B8 OR B6) up through
the frame and through the bracket.
d. Secure with two flange head nuts (B5) or (B7) depending
on which bolt you used.
Figure 5
Figure 6
B8 or B6
B7 or B5
B6
A2
Figure 4
