©2018 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
100837A0
10. Remove the rubber boot and the two bolts from tow hook.
You will not be reusing.
11. Remove tow hook. You will not be reusing. See Figures 8
and 9. Repeat for other side.
NOTE: If model is equipped with eco-boost, cutting the soft
rubber from the around the innercooler will aid in
bumper installment.
12. Insert spacer (A13) into the vehicle frame (behind front
flange). Figure 10.
13. Repeat for other side.
14. Hold left hand bottom frame bracket (A6) in place, using
washer (B3) on bolt (B2).
Bracket will hang in place until fully
secure.
Do not tighten at this time.
Figure 11.
15. Repeat for other side.
Figure 8
Figure 9
Rubber boot
Tow hook
Remove bolts
Figure 10
Figure 11
A13
A6
B3, B2
