©2018 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
9
100837A0
31.
For Models with intercooler feature ONLY:
For maximum
air flow, install air scoop (A14) from behind bumper, using
five B15 and B16 hardware.
32. If not installing optional Ascent bar accessories, plug unused
holes with provided hole plugs (B17). Refer to exploded
view on page 3.
33. Installation is now complete.
Figure 18
B15 and B16
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY
PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
