07610-004-37-37-P
21
To access Setpoints, the machine must be on and not in cycle.
1. Push and hold cycle button a minimum of six seconds. Temperature shows on
left display and will flash on and off.
2. Once button is released, press prime button (left rocker to increase and
right rocker to decrease). This changes rinse temp one degree at a time to a
maximum of 192 °F or a minimum of 180 °F.
3. Once desired temperature is selected, press and hold cycle button a minimum
of three seconds and no more than five seconds (after three seconds
temperature will stop flashing). Release cycle button to accept and move to next
setpoint (drain time).
1. Once setting changes to drain time, current setting shows on left display and will
flash on and off.
2. Press prime button (left rocker to increase and right rocker to decrease). This
changes drain time one second at a time.
3. Once desired time is selected, press and hold cycle button a minimum of three
seconds and no more than five seconds (after three seconds time will stop
flashing). Release cycle button to accept and move to next setpoint (detergent
time).
180
°
f
190
°
f
190
°
f
DRAIN TIME
If there is no activity
(button presses) for 30
seconds, display will exit
Setpoints mode without
saving changes.
To exit Setpoints at any
time, hold cycle button a
minimum of six seconds.
Display will stop flashing
and return to wash
temperature. Machine is
ready to operate.
Adjustable Setpoints:
Rinse Temp
Drain Time
Detergent Time
Rinse-aid Time
Detergent Priming Time
Rinse-aid Priming Time
Temperature Scale
TROUBLESHOOTING
UH30-FND SETPOINTS
14
20
20
RINSE TEMP