waratah HTH624C Operator'S Manual Download Page 40

Page: 40 / 87

Safety—General Carrier Precautions

AM24480,000019D -19-19AUG21-1/1

AM24480,000019E -19-25SEP14-1/1

Processing

•

Operate the harvester head safely. The chain shot
hazard zone is approximately 15 degrees towards the
rear sprocket and in front of the saw bar tip.

•

Do not operate the harvester head with the window
open.

•

Ensure the chain shot protection device is installed and
properly maintained.

15˚

TX1049896

—UN—15OCT08

Chain shot Hazard Zone

Bucking and Piling

•

Place processed logs in a stable position with safe
access for the forwarder.

•

Make parallel, even, piles of logs, with matching ends.

•

Create a debris mat from limbs and tops to help
distribute carrier weight and reduce soil impact.

•

Sort logs by class or species.

•

Exceeding harvester head capacity is not
recommended.

1-6-4

053122

PN=40

Summary of Contents for HTH624C























































































Search results

Summary of Contents for HTH624C

Reviews:

Brands by name

Popular brands

waratah HTH624C, Operator'S Manual

Search results

Summary of Contents for HTH624C

Reviews:

Brands by name

Popular brands