waratah HTH624C, Operator'S Manual

Page: 24 / 87

Safety—Operation Precautions
T7M7G6M,00007E3 -19-29MAR22-1/1
Continued on next page AM24480,0000142 -19-04JUL19-1/2
Do Not Stare into the Laser Beam
The find end sensor is a laser type sensor. When
servicing or carrying out maintenance, turn off the
Waratah controller. Turn the Waratah switch to the Off
position. Do not look directly at the emitter on the sensor
when powered.
Safety Information Summary. This Class 2 laser product
is only intended to detect objects. Do not use it in a
potentially explosive atmosphere. This product uses DC
power: it may explode or burn if an AC voltage is applied.
XJ1317270
—UN—12OCT21
XJ1317284
—19—12OCT21
Laser Find End Safety
Warning: this indicates a hazardous situation which, if
not avoided, could result in death or serious injury
Notice: this indicates a situation which, if not avoided,
could result in product and / or property damage.
Safety Information: Class 2 Laser Product
Warning: this product is only intended to detect object(s).
Do not use it for the purpose of protecting all or part
of a human body. This product is not intended for use
as an explosion-proof product. Do not use this product
in a hazardous location and/or potentially explosive
atmosphere. This product uses DC power; the product
may explode or burn if AC voltage is applied.
Notice: do not wire the cable along with power, or
high-tension, lines, as the sensor may be damaged or
malfunction due to the associated noise. When using a
commercially available switching regulator, ground the
frame ground terminal. Do not use this product outdoors
or in a location in which its light-receiving surface will
come into direct contact with stray ambient light
WARNING
XJ1
163156
—UN—13JUN14
NOTICE
XJ1
163157
—UN—13JUN14
1-3-2 053122
PN=24