waratah HTH624C, Operator'S Manual

Page: 12 / 87

Safety—Operator Safety Precautions
t7m7g6m,1652873332359 -19-18MAY22-1/1
Recommended Harvester Head Position
for Main Saw Chain and Main Saw Bar
Maintenance
CAUTION: Serious injury or death can occur.
The harvester head can move unpredictably.
Always lower the harvester head to the ground
when carrying out maintenance.
CAUTION: Serious injury or death can occur.
Prevent harvester head from being accidentally
activated. Always stop carrier engine and isolate
the Waratah controller located in carrier cab.
1. Open feed arms (2).
2. Operate upper delimb knives (3) to the closed position.
CAUTION: Serious injury or death can occur.
Prevent the harvester head from moving. Always
ensure that the tilt frame is in the harvesting or
processing position and the lock pin is installed.
3. Insert the lock pin in the processing position (5).
4. Lower harvester head to the ground.
5. Deactivate hydraulic interlock.
6. Turn off carrier and turn Waratah switch control to Off
position.
CAUTION: Serious injury or death can
occur. Prevent injury from flying or sharp
6
5
3
2
2
TX1059827
—UN—26MA
Y09
2— Feed Arm
3— Upper Delimb Knife 5— Lock Pin in Processing
Position
6— Main Saw Bar
objects. Always wear approved gloves and
eye protection when performing saw chain
or saw bar maintenance.
7. Pull the main saw bar (6) down from the main saw box.
1-1-3 053122
PN=12