Maintenance—Schedule
T7M7G6M,000049A -19-30AUG21-3/5
Continued on next page
T7M7G6M,000049A -19-30AUG21-4/5
6. Check feed roller arm and upper delimb knife pins and
pin collar, (if in softwood applications). (See Pins.)
SPECIFICATIONS
Top saw mounting bolt
torque at cylinder bore
side
109 Nm
80 lb-ft
Top saw mounting bolt
torque at motor side
142 Nm
105 lb-ft
7. Clean the top saw housing area. Thoroughly clean
the saw bar cavity of any debris. Check the torque on
saw assembly mounting bolts (3) and top saw motor
mounting bolt (4) to specification.
3— Top saw mounting bolt at
cylinder bore side (3 used)
4— Top saw mounting bolt at
motor side (4 used)
3
4
XJ1298299
—UN—09JUN20
Top saw bolts
8. Torque the both main saw cap screws to specification.
SPECIFICATIONS
3/4 Main saw mounting bolts
109 Nm
80 lb-ft
3/4 Main saw motor mounting cap screw torque
142 Nm
105 lb-ft
9. Grease main saw, feed out rack, and bearing if
supercut saw option fitted or swing arm bearing if
3/4-in. saw option fitted. (See Fluids and Lubricants.)
10. Remove plate and visually check rotator pinion grease
level. Apply grease as required. Inspect pinion and
gear faces. Replace when worn. (See Rotator.)
11. Grease fixed feed motor splines and re-shim motor (if
in hardwood applications). (See Feed Rollers.)
7— 3/4 Main saw mounting bolt
8— 3/4 Main saw motor
mounting bolt
8
7
XJ1298304
—UN—09JUN20
3/4 Main Saw Mounting Cap Screw
3-2-6
053122
PN=68
