Operation: Miscellaneous
T7M7G6M,0000451 -19-02JUN20-1/1
T7M7G6M,0000452 -19-30AUG21-1/1
Unattended Harvester Head
When leaving the harvester head unattended, it is
advisable to leave it in the upright position (tilt-up),
pointing away from the operator’s cab, with the boom
stretched right out.
Do not lay the harvester head and link mechanism down
in such a manner that the rotator comes into contact with
the arm. Doing so may result in serious damage to the
rotator motor.
Delimbing Multi-leaders
When handling multi-leaders, delimb up to the leader, and,
if possible, open the delimb arms and feed through. This
will allow the arms to be closed on one of the leaders after
passing the fork. This method requires several metres
before being closed, at which point the harvester head can
be reversed to the point where one leader can be cut off.
CAUTION: When cutting leaders, ensure the saw
bar is not pinched between leaders.
This leader can now be processed.
If the harvester head will not pass over the fork, drop the
log and re-position it further down the log.
2-7-1
053122
PN=49
