Maintenance—Fluids and Lubricants
T7M7G6M,000045E -19-19MAY22-1/1
Grease Point Location—Main Saw Unit (3/4”
Saw Option)
CAUTION: When servicing or carrying out
maintenance on the harvester head, always
ensure the tilt frame is in the harvesting
or processing position and the locking
pin is installed and lower the harvester
head to the ground.
CAUTION: Keep away from the arm capture
zones or the top saw bar opening of the
harvester head while the hydraulic system is
active. Failing to follow these safety precautions
may lead to serious injury.
1. Park machine on level ground.
NOTE: Applying excess grease to the main saw swing-arm
bearing affects the performance of the main saw unit.
2. Stop the engine.
3. Attach a DO NOT OPERATE tag in an obvious place
in the operator's cab.
•
The main saw swing-arm is plugged. The main saw
swing arm bearing grease plug (3) must be removed
and a grease fitting installed to grease the swing arm.
Grease bearing every 100 hours (2 weeks). Apply 2
pumps and if grease appears from the seals on the first
pump no further pumps are required.
Location
Quantity
Main Saw 3/4
in. Unit
Swing Arm
1
Main Saw
Cylinder
2
TX1062915
—UN—12AUG09
TX1062914A
—UN—12AUG09
1— Main Saw Cylinder Barrel
End
2— Main Saw Cylinder Rod End
3— Main Saw Swing Arm
Bearing Grease Plug
3-1-13
053122
PN=62
