13
Step 3: Assemble the side wall panels
Place 4 x part 9F (sheeting) on your worktable and join together with self-tapping screws as per the diagram below. Now fit parts 27K
and 27J (top channel) and parts 27A and 27B (bottom channel) to the sheeting by tapping or sliding it in. Make sure the small lip of
the channel is always facing out. This ensures rainwater cannot build up inside your shed. Make sure parts 27K and 27J are used
as top side channels. TIP (before applying connectors): to help panel and screw holes to line up, fasten screws one at a time from
one side of the wall to the other and pull panel away from screw each time to match up holes. Now fix parts 35R and C24 (mid wall
channels) joined by a mid wall channel connector to the sheeting with self-tapping screws. NOTE: the groove should face downwards.
Fix channels with self-tapping screws and apply part 66 (channel connectors) to enhance the structural strength. Note that screws are
applied to both sides of the connectors.
35R
66
66
C24
27K
27J
27A
27B
9F
9F
9F
9F
ROOF TOP EDGE
RIDGES FACING UP
