15
Step 4: Assemble the roof panel
Place parts S30, S31 and 2 x part S32 (sheeting) on your worktable and join together with self-tapping screws as per the
diagram below.
Fix parts 27F, 27E, 27A and 27B (channels) using self-tapping screws as per the diagram below. Please ensure parts 27A and 27B are
attached to the side of the sheeting which has pre-punched holes as per the diagram below. Make sure the small lip of the channel is
always facing out. This ensures rain water cannot build up inside your shed.
TIP (before applying part 66 connectors): to help panel and screw holes to line up, fasten screws one
at a time from one side of the wall to the other and pull panel away from screw each time to match up holes.
When fixing part 66 (Channel Connector) on the
roof top edge only fix screw from one side
S30
S32
S32
S31
66
66
27F
27E
27A
27B
ROOF TOP EDGE
RIDGES FACING UP
RIDGES FACING UP
