11
Step 2: Assemble the rear wall panels (continued)
Now fit parts 27I and 27H (top channel) and parts 27C and 27D (bottom channel) to the sheeting by tapping it in (diagram A) or sliding
it in
(diagram B). Make sure the small lip of the channel is always facing out. This ensures rain water cannot build up inside your shed.
Make sure parts 27I and 27H are used as top side channels as per diagram A below.
Tip:
If panel and screw holes do not line up, try pulling panel to match up holes.
27I
27H
TOP
27C
27D
9F
9F
9F
99F
27I
27H
27C
9F
27D
9F
9F
9F
ROOF TOP EDGE
ROOF TOP EDGE
RIDGES FACING UP
RIDGES FACING UP
B
A
