Instruction Handbook KL
Chapter 9
BA KL V11 en
10/2014
page 9-20
9.7.3
Barrier ring (Bio - Mix Pumps)
1.
Remove LWD - Cartridge (
9.7.2).
2.
Pull out the old ring with a hook. (The ring will be destroyed).
3.
Clean seat of the barrier ring and the housing.
4.
Grase slightly a new ring and fit it into the housing.
5.
Push a feeler gauge (0.1 mm) between seal seat
and barrier ring.
6.
Careful insert the barrier ring with a mounting tube.
7.
Pull out feeler gauge.
8.
Mount LWD - Cartridge (
9.7.2).
About the feeler gauge the air will be vent.
Abb. 9-18a
Seal ring 2096
LWD - Cartridge
Mounting tube
Abb. 9-18b
