Instruction Handbook KL
Chapter 1
BA KL V11 en
10/2014
page 1-3
1.5
Designed Use
The pumps are intended for industrial use and may only be used in accordance with the information
provided in the instruction handbook. Its may only be used to pump of stipulated medium.
The working points (Flow rate, nominal pressure, rotation speed) in the pump specification
(
data sheet) are defined as values limits, which must not be exceeded.
A change in delivery conditions (e. g. flow rate, flow path, pressure level, pipe diameter, throttle
devices) may cause major changes in the operating conditions. In such cases, compare the new
operating conditions with the details provided in the pump specification. If the changed conditions
should exceed the details provided in the pump specification, it will be necessary to contact the
manufacturer for advice.
Using this pump in potentially explosive atmosphere is prohibited, unless explicitly specified
otherwise.
1.6
Predictable Misuse
Only use the pump for pumping of the stipulated medium.
Do not exceed the stipulated rotational range.
The contents of solids in the medium to be pumped must not be exceeding definite value limits of
particle size and solid content.
Make sure that no foreign matter or particles e.g. metal parts, stones, etc. can get into the pump.
Medium contamination by foreign matter may cause damage to the pump elements!
Do not use a non-operative pump as a shutoff device!