59
W&T
Modem Operation
Subject to error and alteration
5.4.17 &Vn (AT&V[0|1|2])
Display configuration information
This command causes the LAN-Modem to output its
configuration and connection data:
•
&V0
Provides the current configuration data as well as the data
stored in non-volatile profiles 0 and 1. In addition, the
stored destination addresses are output.
•
&V1
The LAN-Modem returns statistics for the last TCP/IP
connection.
•
&V2
T h e L A N - M o d e m s e n d s a s a r e p l y i t s c o m p l e t e
configuration coded in S record format. By sending this data
record to another modem, it is possible for example to copy
configurations over the network.
For additional information, see section
Reading/sending
Configuration profiles
.
Summary of Contents for 58620
