9
W&T
Subject to errors and changes
5xxxx
[Typ]
EN=00c03d004a05
OK xxxxxx
Ethernet-address
1.5 Assigning the IP address using „WuTility“
Once the hardware has been connected to the supply voltage
as described above, you must assign the IP address needed for
operation in a TCP/IP network. You can obtain the correct value
for this parameter from your system administrator.
!
The IP address must be unique throughout the network.
There are various ways of assigning the IP address. To make it
as convenient as possible, we have developed the „WuTility“
tool, which you can download from the WuT homepage at
http://www.wut.de
. This procedure is described in the
following. A summary of the alternatives can be found in the
Appendix to this manual under 7.1.
Be sure that the PC you are using to assign the IP address is
located in the same sub-network as the module and that both
the PC and the module are connected to the network.
When it starts,
WuTility
automatically searches the local
network for connected W&T network devices and generates an
inventory list. This search process can be repeated manually as
often as desired by clicking the
Scan
button:
S e l e c t f r o m t h e d i s p l a y e d l i s t y o u r W e b - T h e r m o -
Hygrobarograph based on the MAC address:
