6
W&T
1 Quick-Start/Commissioning
Just a few steps are required to start up your W&T Web-Thermo-
Hygrobarograph and to make it visible in your network.
1.1 Connecting the power supply 57612
Connect the AC adaptor provided to the terminal provided for the
12-24V AC/DC operating power. Polarity does not need to be
observed.
1.2 PoE power supply 57613
The Web-Thermo-Hygrobarograph PoE 57613 is designed for
use in PoE (Power-over-Ethernet) environments in accordance
with IEEE802.3af. Power is provided by the network
infrastructure using the RJ45 terminal. The device supports
both phantom power using data pairs 1/2 and 3/6 as well as
power feed using the unused wire pairs 4/5 and 7/8.
To enable power management for the supplying components,
the Web-Thermo-Hygrobarograph is identified as a Power Class
1 device with a power consumption of 0.44 to 3.84W.
