21
W&T
Subject to errors and changes
The following functions are available from the configuration
menu beneath the graph:
Start:
Here you specify the starting time for the X-axis.
End:
Here you specify the ending time for the X-axis.
Polling Rate:
Enter here the desired refresh rate for the graph.
The device provides a new value no sooner than after 4
seconds. Entering a value of less than 4 is not useful.
Active:
Use this to turn the individual sensors on or off.
Display, Extreme:
If a zoom level is selected in the graph in
which a display point represents a measuring interval and not
an individual measuring point, this function is used to display
the maximum and minimum measured in this interval. If the
zoom level is selected such that every measured value is
displayed, this function has no effect. If the function is
deactivated, the average value of the displayed interval is
displayed.
Apply changes:
Immediately applies the changes made for the
graph.
